The localization is not working yet and I need to create a PID controller. I am excited to finish last bit of kalman filter to track lanes correctly, localization using particle filter and PID controller to drive the car.
Tracking lanes on real hardware
The car hardware can be controlled easily from the drive module. I am using arduino to control the drive wheel and steering. I use COM over USB to communicate with arduino from drive module.
The localization is not working yet and I need to create a PID controller. I am excited to finish last bit of kalman filter to track lanes correctly, localization using particle filter and PID controller to drive the car.
The localization is not working yet and I need to create a PID controller. I am excited to finish last bit of kalman filter to track lanes correctly, localization using particle filter and PID controller to drive the car.
Subscribe to:
Post Comments (Atom)
-
I have been talking to a friend about building a self driving car and told him that I can show him how to build it it few short sessions. He...
-
OK, its really a bar than a wheel- I took an old servo motor and attached a wooden bar and removed all circuitry keeping the variab...
No comments:
Post a Comment